Max gagne et fils

Series
Max-Chisel

Agricultural Implements

INTRODUCTION

The Great Plains Max-Chisel® is an aggressive primary tillage tool that is designed to achieve complete fracture at shallower depths, leaving fields smoother and more uniform than most traditional disk rippers. Mounted to individual C-shanks, 24" blades on 15" spacing allow plenty of clearance for trash and residue. All feature maintenance-free tapered bearings in a cast hub and a six-lip interlocking seal to keep grease in and dirt out.

Features

Parabolic or chisel shanks
Order the Max-Chisel® the way you want it with two different shank combinations: standard chisel (right) or heavy-duty parabolic toggle-trip shanks (left). When equipped with heavy-duty parabolic toggle-trip shanks, this unit works in the mid-ranges of 8" to 12" – requiring less horsepower than competitive disk rippers that run in the 13" to 15" range – while horizontally fracturing soil much better than a disk chisel. Toggle-trip shanks either run at the set depth or trip – there is no in-between. Both shanks are effective at eliminating ruts and shallow compaction caused by harvest traffic.
Exclusive concave turbo-wave blades with patented “samurai edge”
Two opposing rows of exclusive 24" concave Turbo-wave blades aggressively remove root balls while mixing and incorporating crop residue into the top 4" to 5" of soil. This anchors the residue to the ground to accelerate the decomposition process.
Individual disc mounts
Mounted to individual C-shanks, 24" blades on 15" spacing offer adequate room to clear the flow of trash/residue. They are also designed to perform well in wet conditions.
Maintenance-free bearings
All blades feature maintenance-free tapered bearings in a cast hub with six-lip interlocking seals to keep grease in and dirt out.
Single-point depth stop
Adjust the depth across the entire width of the machine in one convenient location.
Walking tandem axles
Maintain consistent mainframe height for accurate, uniform tillage depth.
Optional angled rear chopper wheels
Patented angled chopper wheels and 15" shank spacing work together to pull dirt back into shank voids, leveling soil while maintaining the vertically-tilled profile left by the shanks.
Optional chopper wheel with ML roller
Choose chopper wheels w/ ML rollers for a smooth, uniform finish.
Rear hitch options
Variety of hitch configurations in long, short, ball, and flex-tongue configurations are available. The rear hitches complement the versatility of the Max-Chisel® by enabling cover crop, nutrient application, and other light-duty towed attachments.
Max-Chisel

MODELS

MC5109
MC5109
Working Width:
11'6"
Transport Width:
14'10"
Minimum HP Required (PTO):
250
REQUEST A QUOTE
MC5111
MC5111
Working Width:
14.0'
Transport Width:
17'4"
Minimum HP Required (PTO):
310
REQUEST A QUOTE
MC5313
MC5313
Working Width:
16'6"
Transport Width:
14'6"
Minimum HP Required (PTO):
360
REQUEST A QUOTE
MC5315
MC5315
Working Width:
19.0'
Transport Width:
14'6"
Minimum HP Required (PTO):
420
REQUEST A QUOTE
MC5317
MC5317
Working Width:
21'6"
Transport Width:
15'8"
Minimum HP Required (PTO):
470
REQUEST A QUOTE
MC5319
MC5319
Working Width:
24.0'
Transport Width:
15'8"
Minimum HP Required (PTO):
530
REQUEST A QUOTE

Brochure

Great Plains - Product Guide
Download PDF
Parabolic or chisel shanks
Order the Max-Chisel® the way you want it with two different shank combinations: standard chisel (right) or heavy-duty parabolic toggle-trip shanks (left). When equipped with heavy-duty parabolic toggle-trip shanks, this unit works in the mid-ranges of 8" to 12" – requiring less horsepower than competitive disk rippers that run in the 13" to 15" range – while horizontally fracturing soil much better than a disk chisel. Toggle-trip shanks either run at the set depth or trip – there is no in-between. Both shanks are effective at eliminating ruts and shallow compaction caused by harvest traffic.
Exclusive concave turbo-wave blades with patented “samurai edge”
Two opposing rows of exclusive 24" concave Turbo-wave blades aggressively remove root balls while mixing and incorporating crop residue into the top 4" to 5" of soil. This anchors the residue to the ground to accelerate the decomposition process.
Individual disc mounts
Mounted to individual C-shanks, 24" blades on 15" spacing offer adequate room to clear the flow of trash/residue. They are also designed to perform well in wet conditions.
Maintenance-free bearings
All blades feature maintenance-free tapered bearings in a cast hub with six-lip interlocking seals to keep grease in and dirt out.
Single-point depth stop
Adjust the depth across the entire width of the machine in one convenient location.
Walking tandem axles
Maintain consistent mainframe height for accurate, uniform tillage depth.
Optional angled rear chopper wheels
Patented angled chopper wheels and 15" shank spacing work together to pull dirt back into shank voids, leveling soil while maintaining the vertically-tilled profile left by the shanks.
Optional chopper wheel with ML roller
Choose chopper wheels w/ ML rollers for a smooth, uniform finish.
Rear hitch options
Variety of hitch configurations in long, short, ball, and flex-tongue configurations are available. The rear hitches complement the versatility of the Max-Chisel® by enabling cover crop, nutrient application, and other light-duty towed attachments.